410
$99.00$279.00
Limited Stock Offer
Selected products are now available at savings of up to 70% off.
Professional refrigerant supply
R410A — supply for compatible high-pressure HVAC systems.
Factory-sealed professional refrigerant for air-conditioning and heat-pump equipment specifically engineered and labeled for R410A.
25 lb / 11.3 kg
HFC refrigerant blend
A1 — lower toxicity / no flame propagation
25 LB cylinder
Refrigerant
R410A
Net contents
25 lb / 11.3 kg
Product family
HFC refrigerant blend
Safety class
A1 — lower toxicity / no flame propagation
Technical snapshot
Key R410A product details in one place.
Use these specifications as a purchasing reference, then confirm the refrigerant designation and service requirements shown by the equipment manufacturer.
Model
R410A
Container
25 lb / 11.3 kg
Refrigerant format
Near-azeotropic blend
Classification
A1 — lower toxicity / no flame propagation
Packaging
Factory-sealed service cylinder
Recommended user
Professional / qualified service use
R410A is an HFC blend used in many air-conditioning and heat-pump systems. Service should be performed only with equipment and tools rated for the system.
Before servicing
Match the system, refrigerant and service procedure.
Refrigeration and HVAC equipment is engineered around specific pressure, lubricant, material and safety requirements. Verify the system documentation before connecting or opening a cylinder.
R410A systems operate at pressures different from many older refrigerant systems; use correctly rated service tools.
R410A is not a direct substitute for equipment designed for R22 or another refrigerant.
Follow manufacturer procedures for recovery, evacuation and charging.
Compatibility guide
Where R410A may be specified.
Refrigerant selection should always follow the equipment data plate, manufacturer service literature and applicable regulations.
01
Compatible residential and light-commercial air conditioners
Use only when the equipment manufacturer identifies R410A as an approved refrigerant for the system.
02
Approved heat-pump systems designed for R410A
Confirm the equipment label and manufacturer service documentation before charging or servicing the system.
03
Other HVAC equipment whose data plate and service documentation specify R410A
Follow the refrigerant, equipment and jurisdiction-specific requirements that apply to the intended service work.
Cylinder & handling reference
Packaged for qualified service use.
Inspect the cylinder, product label and safety information before use, transport or storage.
Package contents
One sealed R410A refrigerant cylinder
The service cylinder contains the stated net refrigerant weight and should be checked on arrival before it is placed into service.
- Refrigerant: R410A
- Net contents: 25 lb / 11.3 kg
- Factory-sealed service-cylinder format
Handling reminder
Review compatibility, SDS and local requirements.
Keep the cylinder secured and stored according to the product label, safety data sheet and applicable transport or storage rules.
- Read the cylinder label and SDS before handling.
- Use service equipment approved for this refrigerant.
- Recovery, recycling and disposal must follow applicable regulations.
This product page is a general purchasing reference. It does not replace manufacturer instructions, the refrigerant safety data sheet, technician training, certification requirements, or applicable federal, state and local regulations.